Using the PCMCIA Card Slot
Various different functions can be added by inserting PCMCIA cards into the system. This system supports 16/32 bit, type I or II PCMCIA card types.
The PCMCIA card slot does not support a ZV card or a PCMCIA III card.
To insert a PCMCIA card
Before using the PCMCIA slot, remove the slot protector.
Push the eject button of the PCMCIA card slot once to pop it out. Push the button again to eject the slot protector.
1.Insert a PCMCIA card into the PCMCIA card slot on the side of the computer.
Eject Button
2.Windows automatically installs the necessary driver for the card. If there is no available driver found by Windows, you have to install the driver using a disk supplied with the card.
To remove a PCMCIA card
1.
) on the taskbar.
2.On the [Safely Remove Hardware] dialog, select the appropriate PCMCIA card and click Stop.
3.When [Stop a Hardware Device] dialog appears, click OK.
4.Click Close to close the [Safely Remove Hardware] dialog.
5.Push eject button of the PCMCIA card slot once, then the button pops out.
6.Push the button again to eject the PCMCIA card.
Using the Computer 37
