Battery Warning

You will hear an alarm when the remaining battery charge is under 10%. Connect the power cable or turn off the computer and install a fully charged battery.

When the remaining battery charge is under 3%, the computer automatically saves current work and turns off. This may be different according to the settings in Control Panel > Performance and Maintenance > Power Options > Alarms tab.

Battery Calibration

Calibrating your battery once a month is one of the recommended methods of increasing your computer’s battery life. To calibrate the battery complete the following steps:

Calibration Notes:

You should start the battery calibration process with a fully charged battery, battery status LED is green. The power meter may not show 100%.

Before you commence the battery calibration process you should fully charge, then fully discharge and finally fully recharge the battery again.

1.Disconnect the AC power adapter after turning off the system.

2.Restart your computer and press <F2> to enter BIOS setup.

3.Using the arrow keys, highlight Smart Battery Calibration in the Boot menu.

4.Press <Enter> to start calibration process. The calibration usually takes 3 to 5 hours depending on the current battery charge.

5.When the calibration process is complete, recharge the battery fully.

80 Users Manual

Page 93
Image 93
Samsung NQ25PRT000/SEF, NQ20RH3G98/SEK, NQ25TP06M6/SUK manual Battery Calibration, Battery Warning, Calibration Notes