Printing from Start to Finish
Here’s what to do to print a basic
■“Printing with Windows” below
■“Printing on a Macintosh” on page 9
If you’re already familiar with EPSON ink jet printing, you can skip ahead to these sections:
■ “Using PhotoEnhance, Custom, and Advanced Settings” on page 13
■“Printing on Envelopes” on page 15
■“Using Special Papers” on page 16
■“Selecting the Correct Media Type” on page 17
Printing with Windows
This section describes the basic steps for printing with Windows.
(To print on a Macintosh, see page 9.)
Loading Paper
Make sure your printer and computer are turned on.
Place your paper against the right edge of the sheet feeder and slide the left edge guide against the paper. (Don’t push the paper deeper into the feeder.)
Follow these guidelines when loading paper:
Load paper only up to this arrow
Slide paper against the right edge
■Load the printable side face up. It’s usually whiter or brighter than the other side.
■Load letterhead or preprinted paper into the printer top edge first.
■Don’t load paper above the arrow on the left edge guide.
5