Loadingi Rollll Paper

1Slide the black paper stop off the end of the spindle.

Note: To use paper with a 3-inch core, attach the gray adapters to the paper stops at each end. See your Printer Guide for details.

2Position the roll as shown, then slide it onto the spindle.

3Slide the black paper stop back onto the spindle and insert it firmly into the end of the roll.

4Open the roll paper cover.

5Place the roll paper in the printer as shown. (The black end of the spindle goes on the left.)

6Make sure the printer is turned on, then press the Paper Source button until the or icon appears.
7Release the paper lever.8Feed the paper into the slot and pull it all the way through.

9Turn the roll back to remove any slack. Then align the bottom edge with the horizontal line and the right edge with the vertical line.

10Return the paper lever to the locked position. Then close the roll paper cover.

11Press the Pause button. The paper feeds into printing position.

Caution: To prevent creasing the paper, remove it from the paper path and roll it up when you’re not printing.

1