Epson 9800, 7800 Loadingi and Usingi Cut Sheet Paper, Printing on Posterboard, READY, Press the, Press the, Release the paper lever, 3Release the paper lever

Loadingi and Usingi Cut Sheet Paper

1Remove any roll paper from the paper path. Make sure the printer is on and the roll paper cover is closed.

2Press the Paper Source button until the icon appears on the LCD.3Release the paper lever.

Note: If you’re printing on small sheets or fine art paper, do not release the paper lever.

4Feed the sheet into the paper slot. Make sure the right edge of the paper is straight and aligned with the marks on the roll paper cover.

5If you released the paper lever, return it to the locked position.

6Press the Pause button. The sheet feeds into the printing position automatically and READY appears on the control panel.

Caution: To avoid damaging the printer, never move the paper lever during printing, or while the Power or Pause light is flashing.

7Print your page. After it is finished, the sheet stays in the printer.8To remove your print, press the button.

Printing on Posterboard

When you print on posterboard or other thick media (more than 19 mil thick), you should open the front cover before loading as described below.

1Make sure the printer is on and the roll paper cover is closed.

2Press the Paper Source button until the icon appears on the LCD.

3Release the paper lever.

2