Epson 9800, 7800 Replacingl i Printeri Parts (continued)i, Replacing the Maintenance Tank, MAINTENANCE TANK FULL, 4Insert the new tank, 7Insert the new cutter blade

Replacingl i Printeri Parts (continued)i

5Hold down the side pin, as shown, then turn the latch to the right.

6Release the side pin and carefully remove the cutter blade.

7Insert the new cutter blade.

8Hold down its side pin and secure it with the latch.

Replacing the Maintenance Tank

The Epson Stylus Pro 7800 has one maintenance tank (on the right side) and the 9800 has two (one on either

side). You need to replace the maintenance tank

(part # C12C890191) when you see MAINTENANCE TANK FULL on the LCD. The ink light also turns red.

1If you have the Epson Stylus Pro 9800, check the LCD to determine which tank needs to be replaced (left or right).

Note: The printer will not print if one of the maintenance tanks is full. On the Epson Stylus Pro 9800, the right tank is used more than the left. To maximize tank life, you can switch the tanks.

2Make sure the printer is on, and pull out the maintenance tank as shown.

Caution: Do not tip the tank, or ink may spill out.

3Place the used tank in the plastic bag included with the new tank.

4Insert the new tank.

9Close the front cover. The carriage returns to the home position.

7