Note:

Cl The printer has a minimum and maximum loading position. l,f you try to move the loading position beyond these limits, the printer beeps and the paper stops moving.

Ll When the paper reaches thefactory-set loading position, the printer beeps. Use thefactory setting as a reference point when adjusting the loading position.

Adjusting the print position

The print position is the position on the page where the print head actually prints during a print job. If you want to change the current print position, you can use the micro-feed feature as follows:

1.Press the Pause button to stop printing; the Pause light comes on.

2.Hold down the AH button and press the Economy/ Condensed (up) or Font (down) button to adjust the print position on the page.

3.Press the Pause button again to resume printing. (You may have to experiment a few times to get the results you want.)

Note:

The prider has a limit - 8.0 mm CO.31 inch) - to the anrowzt you can move the print position backwards using micro fed. Feeding stops when you reach this limit.

2-10 Using Other Printer Functions