Auto line feed

When the auto line feed feature is on, each carriage return (CR) code is accompanied by a line feed (LF) code. If your printed text is unexpectedly double-spaced, set this feature to off. If text lines print on top of each other, set it to on.

Changing the default settings

To change the printer’s default settings, you press the control panel buttons; the control panel lights show your selections.

Follow the steps below to make your changes:

1.Make sure the printer is turned off and paper is loaded in the paper feeder.

2.Hold down the Economy/Condensed button and turn on the printer to enter the default-settings mode. (Hold down the button until the printer starts working; it takes a few seconds.)

The printer loads a sheet of paper and prints a brief summary and instructions. It instructs you to select the language that you want messages printed in (English, French, German, Italian, or Spanish).

3.Press the Font button until the Font lights indicate the language of your choice; then press the Alt button to make your selection.

Spanishooe

0 on • off

Using Other Printer Functions 2-15