After you press the Alt button, the printer prints the current default settings and the next instruction in the language you selected. Wait until printing is finished, then go to the next step.
4.To move to the feature you want to change, press the Alt button until the Data, Paper Out, and Ink Out lights indicate the appropriate selection.
Oon 0 off 8 flashing
For example, if you want to change the character table setting, press the Alt button until the Data and Paper Out lights are off and the Ink Out light is on.
5.Next, press the Font button to change the setting.
As you move from setti,ng to setting, the Font lights turn on (0), off (O), and flash (0) to show your selection, as indicated in the printed sample. The next page shows a typical sample printout.