EPSON PowerLite 9300i Projector

Controlling Your Projector(s)

The control buttons in the upper-right of the EMP Monitor screen let you turn on and off the projectors and select video sources. (Hold the mouse pointer over a button to see a description of its meaning.) Make sure you’ve selected the projector(s) you want to operate (with the mouse pointer) before clicking one of the buttons.

In a few moments, your projectors are displayed as icons as shown:

Control buttons

Note: To turn on a projector when it’s in standby mode (plugged in but not projecting), you must have selected Network ON as the Standby Mode setting in the projector’s Advanced1 menu.

Registering a Projector inEMP NetworkManager

EMP NetworkManager lets you receive e-mail notifications alerting you to possible projector problems.

1.To open the program, select EMP NetworkManager from the Start menu.

You see this screen:

2.If you’d like to register a projector manually and you know its IP address, click the Projector address selection icon. You see this screen:

3.Enter the projector’s IP address and click Add. The projector’s icon is added to the EMP NetworkManager screen.

Creating the E-Mail Settings

1.If EMP NetworkManager is not already running, open it from the Start menu.

You see your registered projectors displayed as shown:

2.Double-click the icon for the projector whose e-mail settings you want to create.

14 - EPSON PowerLite 9300i Projector

10/03