EPSON PowerLite 9300i Projector

3.EMP NetworkManager connects to the projector, and you see this screen:

4.Verify that the network settings are correct.

❏Make any desired changes to the projector’s network address configuration (turning off DHCP enables the manual settings).

❏You can give the projector a name—up to 15 characters long, including the hyphen (-) symbol.

Naming the projector helps you identify it in EMP Monitor and EMP NetworkManager. This is especially useful if you’re managing more than a few projectors.

5.Click Mail Notification Settings. You see this screen:

6.Select ON for the Mail Notification setting.

7.Enter the IP address and port number of the SMTP server used for sending e-mail. (The port’s default setting is 25, but you can enter any number from 1 to 65535.)

8.Enter up to three e-mail addresses where you want the event notification messages to be sent.

9.Click the Setting a Notification Event button next to each address, then select the conditions under which you want a message to be sent.

10.Click OK, then on the next screen click Set. Confirm as needed.

11.When you see the test message window, you can send a message with the heading “TEST MAIL” to the addresses you have entered. The projector’s name and IP address are included in the body of the message.

12.When done making all your projector settings, close the EMP NetworkManager. (It does not have to be open for messages to be sent or received.)

Understanding the E-mail Messages

If a projector experiences a problem, it sends an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes the heading “EPSON Projector” in the subject line.

The body of the message contains:

❏the name of the projector

❏the projector’s IP address

❏a description of the problem

If a plus (+) sign appears before the description, it indicates that a problem has occurred. A minus (–) sign appears when the problem goes away or is resolved.

10/03

EPSON PowerLite 9300i Projector - 15