Epson 9300i Positioning the Projector

EPSON PowerLite 9300i Projector

Mode	Refresh Rate (Hz)	Resolution		Positioning the Projector
SVGA—56	56	800 ⋅ 600
SVGA—60	60	800 ⋅ 600		❏ Place the projector on a sturdy, level surface.
SVGA—72	72	800 ⋅ 600
				❏ Make sure there is plenty of space for ventilation around
SVGA—75	75	800 ⋅ 600
				and under the projector. Do not set the projector on top of
SVGA—85	85	800 ⋅ 600
				loose papers that could block the vents under the projector.
SVGA—120	120	800 ⋅ 600
XGA—43i	86	1024	⋅ 768	❏ Make sure the projector is within 10 feet of a grounded
				electrical outlet or extension cord.
XGA—60	60	1024	⋅ 768
XGA—70	70	1024	⋅ 768	Image size increases with distance, but varies depending on
XGA—75	75	1024	⋅ 768	how you’ve adjusted the optical zoom and other settings.
XGA—85	85	1024	⋅ 768
XGA—120	120	1024	⋅ 768		TBD
SXGA1—70	70	1152	⋅ 864
SXGA1—75	75	1152	⋅ 864
SXGA1—85	85	1152	⋅ 864
SXGA1—100	100	1152	⋅ 864
SXGA2—60	60	1280	⋅ 960
SXGA2—75	75	1280	⋅ 960	37 to 50 ft	7 to 10 ft	3 to 5 ft	approx. distance
SXGA2—85	85	1280	⋅ 960				from screen
SXGA3—43i	86	1280	⋅ 1024	It’s best to place the projector directly in front of the center of
SXGA3—60	60	1280	⋅ 1024	the screen, facing the screen squarely. If it isn’t placed this
SXGA3—75	75	1280	⋅ 1024	way, the image will be “keystone” shaped, instead of square or
SXGA3—85	85	1280	⋅ 1024	rectangular. If this happens, you can use the projector’s
SXGA+60	60	1400	⋅ 1050	keystone buttons (see page 9) or QuickCorner™ function to
				correct the image shape (see page 10).
SXGA+75	75	1400	⋅ 1050
SXGA+85	85	1400	⋅ 1050
UXGA—48i	96	1600	⋅ 1200				Projector
UXGA—60	60	1600	⋅ 1200	Screen
UXGA—65	65	1600	⋅ 1200
UXGA—70	70	1600	⋅ 1200
UXGA—75	75	1600	⋅ 1200		Overhead View
UXGA—80	80	1600	⋅ 1200
UXGA—85	85	1600	⋅ 1200	If you place the projector between the top and bottom of the
iMAC VGA	117	640 ⋅ 480		screen, you can use the Lens Shift to raise or lower the image
iMAC SVGA	95	800 ⋅ 600		(see page 9).
iMAC XGA	75	1024	⋅ 768
MAC13	67	640 ⋅ 480
MAC16	75	832 ⋅ 624		Screen
MAC19—60	59	1024	⋅ 768				Ideal
			⋅ 768
MAC19	75	1024					height
MAC21	75	1152	⋅ 870
					Side View
				If you place the projector below screen level, you’ll have to tilt
				it up by extending its feet. This causes the image to lose its
				square shape, but you can correct the distortion by pressing
				the Keystone button as described on page 9.

10/03 EPSON PowerLite 9300i Projector - 3