Epson 7890, 9890 Chapter 1: Setting Up the Printer

This chapter includes the following information:

•Unpacking and assembling the Pro 7890 and Pro 9890

•Connecting the power cord

•Installing ink

•Connecting to your computer and a network

•Installing the printer software for Macintosh or Windows

•Updating the printer firmware

•Configuring the printer for a network

Follow these steps to assemble your printer and its stand.

Before you begin, make sure you have sufficient space to set up and use the

printer—at least 12 inches on all sides in addition to these dimensions:

•53.4 × 35.6 inches (1356 × 903 mm) for the EpsonStylus Pro 7890

•73.4 × 52 inches (1864 × 1318 mm) for the EpsonStylus Pro 9890

Chapter 1: Setting Up the Printer

WARNING: Four people are

required to unpack and set

up the printer.

Note: When choosing a

place for the printer, leave

adequate room for easy

access and ventilation.

Avoid locations subject to

direct sunlight, excessive

heat, moisture, or dust.

Also avoid locations near

potential sources of

electromagnetic

interference, such as

loudspeakers, cordless

phones, TVs, or air

conditioners.