48
48 |Setting Up the Printer
6. After installing all 9 cartridges, close the ink covers. The printer begins
charging the ink delivery system and the PPower light flashes.
After ink charging is completed, you need to load paper before READY will
appear on the display. See page 55 for instructions.
Connecting to Your System
You can use USB and/or Ethernet network connections.
For USB connection, make sure your system has the appropriate port and
you have a standard, shielded cable 10 feet (6 m) long or less.
To connect to a network hub, you need a standard RJ-45 CAT-5 network
cable. To connect directly to your computer’s network interface, you need
an RJ-45 CAT-5 crossover cable.
1. Make sure that both the printer and the computer are turned off.
Caution: Charging takes
about 15 minutes. Never
turn off the printer,
remove the maintenance
tank, or open the front
cover or ink covers while
the PPower light is
flashing, or you may
damage the printer.