Epson A881391 Attaching the Tilt and Swivel Base

Attaching the Tilt and Swivel Base

Before you attach the tilt and swivel base, cover your work area with a blanket or foam pad to avoid scratching the monitor during assembly. Then follow these steps:

1.Carefully set the monitor face down on the padding so the bottom of the monitor is facing you.

2.Locate the two latches and the four sets of hooks on the top portion of the base.

14” Super VGA Color Monitor 5

Contents

(Model A881391) Page Page Page Page Page Page Page lntroduction Energy Star Compliant Where to Get Help CompuServe® On-lineSupport Unpacking the Monitor Setting Up the Monitor Attaching the Tilt and Swivel Base Note Selecting a location for the Monitor connector Turning On the Monitor Adjusting the Monitor Controls Page Cleaning the Monitor Troubleshooting The power indicator is on, but there is no image on the screen The image is not centered or it locks in place on the screen The image is too big or too small for the screen Specifications Scanning Modes Power Supply Environment Requirements Safety Standards Physical Characteristics Epson America (USA) Epson America (International) Epson International Marketing Locations Distributors