Follow these steps to connect the monitor to your computer:
1.Make sure the monitor, computer, and any peripheral devices are turned off.
2.Turn the monitor around so the back of the monitor is facing you.
3.Remove the plastic covers on the video interface cable connectors and plug the cable into the VGA connector shown below. Tighten the two screws on the cable connector.
AC power connector | V G A c o n n e c t o r |
4.Plug the other end of the video cable into the video connector on the back of the computer and tighten the two screws on the cable connector.
5.Plug the power cord into the AC receptacle on the back of the monitor.
6.Plug the other end of the power cord into a properly grounded wall outlet.
8 14” Super VGA Color Monitor