Figure 1-5.

Directing the ribbon

6.Replace the front lid by inserting its legs into the slots near the front corners of the printer. Lay the lid down and press to snap it into place.

Replacing the Ribbon

When your printing becomes light and you need to replace the ribbon, follow these steps:

1.Remove the front lid.

2.Grasp the ribbon cartridge handle and pull out the cartridge.

3.Follow the ribbon installation instructions above to insert the new ribbon cartridge.

Plugging in the Printer

Now plug in your Apex80. Make sure that the power switch on the left side of the printer is off before you plug in the printer.

1-6

Setting Up