•If there are print codes in the document or file you are printing, those codes will override your SelecType settings. This seldom happens, since you usually won’t use SelecType with files that have such codes, but if your Apex80 follows the SelecType instructions for only part of a document, print codes in the document may conflict with the SelecType modes.
•After you turn on a mode with SelecType, it stays in effect until the printer is turned off or until you send a software command that overrides it. (In general, software commands override SelecType settings.) If, for example, you use SelecType to print a document in emphasized type, anything you print after that will be emphasized unless you first turn the printer off and back on.
3.4 | SelecType |