3.Align the left side of the left edge guide with the guide mark on the paper guide. See Figure 1-17. You may later wish to adjust this edge guide depending on the margin setting in your application program.

Figure 1-17.

Guide mark for paper alignment

Automatic paper loading

Now you are ready to load single-sheet paper using the Apex80’s AUTO LOAD feature.

To load paper automatically, just follow these steps:

1.Push back the paper release lever. (See Figure 1-16.) The single-arrow icon behind the lever marks the position the lever should be in for loading single-sheet paper.

2.Turn on the printer.

3.Make sure that the ON LINE indicator is off. If it is not off, press the touch-sensitive panel labeled ON/OFF LINE.

4.Adjust the right edge guide to fit the sire of the paper.

5.Slide the paper down through the edge guides until it meets resistance. Press down on the paper a bit more to make sure that it is firmly in place, as shown in Figure 1-18.

Setting Up

1-17