BTP-M170 User’s Manual
it in time.
Do not use alcohol or gasoline to clean any parts of the printer.
During the clearance, be careful not to spread dirt onto screw rod or other
transmission parts.
5.2.3 Lubricating the printer
Lubricant position and model:
1) Inject 013 lubrication into felt at two sides of the carriage.
2) Inject G18 lubrication into the slot of screw rod.
3) Inject G36 lubrication the balance wheel of ribbon.
4) Inject G19 lubrication at the jointing point of carriage base and mechanism metal parts
as shown.
Print head iron mat
Carriage holding shaft
Screw rod
Carriage
Ribbon drive wheel
Ribbon balance
wheel
PtintHead
- 20 -
Fill G18
Lubrication
at screw rod
Fill G36
lubrication at
balance wheel
Fill G19
lubrication
Fill 013
lubrication