Focusing and Zooming the Image

To adjust the sharpness or size of the image:

Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the Pattern button on the remote control, then select Cross-hatching.

1.Press the Focus or Zoom button on the projector or remote control. You see this screen:

2. Use the arrow buttons to adjust the image sharpness or size.

Note: If you use the remote control, you can stand close to the screen while focusing the image. This lets you adjust the picture more precisely.

3. Press ESC when done.

Selecting the Input Signal Setting

If you’re using the projector’s Input A port, select the correct setting for the type of video equipment you’ve connected to it:

1.Press the Menu button on the remote control.

2.Use the menu navigation buttons to open the Setting menu, then open the Input Signal menu and select Input A.

3.Choose from these options:

■YCbCr for a video player that outputs an NTSC signal.

■YPbPr for a video player that outputs an HDTV signal.

■RGB-Videofor a video player that outputs an RGB video signal.

Note: Check the label next to the port on your video equipment, if you’re unsure of which setting to use.

21