Adjusting the Color

You can use the Cinema Color Editor to fine-tune the color of the image. If you select RGB as the color mode, you can adjust the offset, gamma, and gain for each signal color (red, green, and blue). If you select RGBCMY, you can adjust the hue and saturation for each of the six colors.

1.Click the Picture Quality button, then click Adjustment of image.

Select

Picture Quality

Click

Adjustment of image

Select the color mode

Click Adjust

2.Select one of the following color modes, then click Adjust.

■RGB: Lets you adjust the offset, gamma, and gain for each signal color. Use Offset to adjust darker shades, Gamma for intermediate shades, and Gain for the lightest shades.

■RGBCMY: Lets you adjust the hue and saturation for each of six colors, as shown on the color palette below. After moving a slider bar, click Apply.

Adjust the hue

 

 

 

 

 

Adjust the

 

 

 

 

 

saturation

(red, green,

 

 

 

 

 

 

 

 

 

blue, cyan,

 

 

 

 

 

magenta,

 

 

 

 

 

yellow)

 

 

 

 

 

 

 

 

 

 

 

 

44