Saving and Resetting Menu Selections
Once you’ve adjusted the picture settings, you can save them as a group using the Memory feature. This lets you easily recall them and switch from one group of settings to another. You can save up to six groups of settings.
If necessary, you can use the projector’s reset options to restore its
Creating Memory Settings
After adjusting the picture to your liking, you can save your settings as a group in the projector’s memory. This stores all the image quality settings described on pages 27 through 30, plus the Aspect and Color Mode settings (pages 19 and 20).
1.Press the Menu button on the remote control.
2.Open the Image menu, then select Memory: Standard.
3.Select the memory name you want to use, then press the 
button. Your settings are saved.
Note: Saved settings are indicated by a green 
highlight next to the memory name. If you select a name that is already in use, the existing contents will be erased and the new settings saved in their place. You can use Cinema Color Editor to customize the names of the settings (see page 47).
Once you have created one or more memory settings, you can easily recall them:
1.Press the Memory button on the remote control.
2.If you’ve used Cinema Color Editor to create advanced memory settings, choose Standard or Advance to select the type of setting you want to use.
3.Use the arrow buttons to select the desired setting, then press the 
button.
Note: Select Last Memory if you want to return to the last standard memory setting that was used (available only if you’ve created advanced memory settings using Cinema Color Editor).
Memory button 
After a moment, the image appears on the screen using your selected setting.
31