MSCDEX.EXE INSTALLATION INSTRUCTIONS

MSCDEX.EXE must be included in the AUTOEXEC.BAT tile. The MSCDEX.EXE will be invoked each time the system boots up. The syntax is as follows:

C:\ <path> \MSCDEX.EXE / D:<device name. /L:<drive letter>/M:<buffersize>

Example:

C:DOS\MSCDEX.EXE /D:EPSON00l /M: 12

Path-filename

The path where the MSCDEX.EXE tile is located.

Device-name

The same name that was used with the DEVICE DRIVER in the CONFIG.SYS tile.

Buffer Size

Specifies the number of sector buffers. The default is 12.

IL:

Specifies the drive letter to the first CD-ROM drive.

IV:

Directs MSCDEX to display memory statistics when it is loaded.

ATA/IDE Owner’s Manual

14