Customizing Projector Operation
Use these settings to activate the Direct Power ON feature, set the child lock or sleep mode, and make the fan run faster for
Press the Menu button. Select Settings > Operation and then choose from these options:
■Direct Power ON
Use this feature to turn on the projector automatically when you plug it into an electrical outlet.
Note: When this feature is used, the projector may turn itself on after power outages, or after any temporary interruption of power. Make sure your electrical outlet isn’t controlled by a wall switch or timer.
■Sleep Mode
When Sleep Mode is on, the projector turns off the lamp if it has not received any input signals for the specified amount of time (5, 10, or 30 minutes). You can also turn Sleep Mode off.
■Child Lock
When this feature is on, the projector does not come on unless you press and hold the P Power button on the control panel for three seconds. (The remote control operates normally.)
■Fan Speed
When using the projector at an altitude above 5000 feet (1500 meters), select High to ensure that the internal temperature is regulated properly. Set to Normal for lower elevations.
22 Using the Projector