Epson CPD-20172R1 28

5. Loosen the two silver screws holding the lamp in place. (You can’t remove these screws.)

6. Grasp the lamp as shown and pull it straight out.

Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding proper disposal or recycling. Do not place in the trash.

7. Gently insert the new lamp and tighten its screws.

Caution: Don’t touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new lamp assembly.

8.To replace the lamp cover, insert the tabs and then snap the cover into place. (The projector won’t work if the lamp cover is loose.)

After replacing the lamp, you need to reset the lamp timer, as described in the next section.

28 Caring for the Projector

Contents

Page Copyright Notice Contents Problem Solving Specifications and Notices Index Welcome Registration and Warranty Projector Parts Page Optional Accessories About This Manual Getting More Information Page Using the Projector Choosing a Location Page Adjusting the Picture Page Controlling Your Presentation Adjusting the Volume Freezing the Action Turning Off the Picture and Sound Using the Projector’s Menu System Changing Menu Settings Adjusting the Appearance of the Picture Choosing the Color Mode Using Picture Quality Settings Adjusting Computer Images Saving and Recalling Picture Settings Using Advanced Picture Settings Page Using On-screenDisplay Features Creating a Custom Logo Choosing a Menu Language Customizing Projector Operation Viewing Lamp Usage and Other Information Restoring the Default Settings Caring for the Projector Cleaning the Lens Cleaning the Projector Case Cleaning and Replacing the Air Filters Replacing the Lamp Page Resetting the Lamp Timer Storing the Projector Transporting the Projector Page Problem Solving What To Do When the Lights Flash Solving Projector Problems The projector turns itself off after a period of time The projector turns on by itself There is no sound coming from the projector The projector doesn’t respond to remote control commands Solving Picture Problems If you’re using a Macintosh® laptop with OS X: If you’re using a Macintosh laptop with OS 9.x or earlier: The picture is upside-downor reversed The picture is wider at the top or bottom The picture is taller on the left or right side The picture contains static or noise The picture is blurry The picture looks too light or too dark The colors on the screen don’t look right Where To Get Help Specifications and Notices Projector Specifications General Remote Control Projection Lamp Dimensions Electrical Environmental Safety and Approvals Compatible Video Formats Important Safety Information Page FCC Compliance Statement Declaration of Conformity Epson America, Inc. Limited Warranty Page Index