1.Make sure the Epson Stylus CX is on.
2.Make sure that the document cover is closed, then open the scanner.
Caution:
Do not open the scanner when the document cover is open.
3.Press and release the B ink button. The ink cartridge holder moves to the check position and the P On and B ink lights flash. If one of the cartridges is low or empty, the Epson Stylus CX moves that cartridge to the _ ink out mark.
Note:
Don’t hold down the B ink button for more than 3 seconds, or the printer will start to clean the print head.
Caution:
Don’t move the print head by hand; this may damage the Epson Stylus CX. Always press the B ink button to move the print head.
Maintaining Your Epson Stylus CX 21