Notices

Important Safety Instructions

Before using your Epson Stylus CX3800 Series all-in-one, read and follow these safety instructions:

■Be sure to follow all warnings and instructions marked on the Epson Stylus CX.

■Use only the type of power source indicated on the Epson Stylus CX label.

■Use only the power cord that comes with the Epson Stylus CX. Use of another cord may cause fires or shock. Do not use the cord with any other equipment.

■Place the Epson Stylus CX near a wall outlet where the plug can be easily unplugged. Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.

■Do not let the power cord become damaged or frayed.

■If you use an extension cord with the Epson Stylus CX, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

■Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.

■Leave enough room around the Epson Stylus CX for sufficient ventilation. Do not block or cover openings in the Epson Stylus CX case or insert objects through the slots.

■Do not place the Epson Stylus CX near a radiator or heating vent or in direct sunlight.

■Place the Epson Stylus CX on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle.

■Make sure the back of the Epson Stylus CX is at least 3.9 inches (10 cm) away from the wall.

■Do not open the scanner section while the Epson Stylus CX is copying, printing, or scanning.

■Do not spill liquid on the Epson Stylus CX.

■Except as specifically explained in your documentation, do not attempt to service the Epson Stylus CX yourself.

Notices 29