13.Press the B ink button. The CX5000 Series begins charging ink and the On light starts flashing. This takes about one minute. When it’s finished, the On light stops flashing and remains on, and the B ink light goes out.
Caution:
Never turn off the CX5000 Series while the On light is flashing or you’ll waste ink.
If you removed a low or expended ink cartridge, you cannot reinstall and use the cartridge.
Note:
If the B ink light stays on (not flashing), the ink cartridge may not be installed correctly. Press the B ink button again and reinstall the ink cartridge until it clicks into place.
If you replaced a cartridge while copying a document or photo, cancel printing and make sure your original is still placed correctly on the document table. Then copy your original again.
Replacing Ink Cartridges 39