EPSON Stylus CX7300/CX7400/DX7400/CX8300/CX8400/DX8400 | Revision A |
1.4 | General Specifications |
| |||
1.4.1 | Electrical Specifications |
| |||
|
| Table |
| ||
|
|
|
|
|
|
|
| Item | |||
|
|
|
| ||
Rated power supply voltage | 100 to 120 VAC |
| 220 to 240 VAC | ||
|
|
|
| ||
Input voltage range | 90 to 132 VAC |
| 198 to 264 VAC | ||
|
|
|
| ||
Rated current (Max. rated current) | T.B.D. A (T.B.D. A) |
| T.B.D. A (T.B.D. A) | ||
|
|
| |||
Rated frequency | 50 to 60 Hz | ||||
|
| ||||
Input frequency range | 49.5 to 60.5 Hz | ||||
|
| ||||
Insulation resistance | 3000 V (for one minute) | ||||
|
| ||||
Energy conservation | International Energy Star Program compliant | ||||
|
|
|
|
|
|
|
| Printing | T.B.D. W |
| T.B.D. W |
|
| (ISO10561 Letter Pattern) |
| ||
|
|
|
|
| |
Power |
|
|
|
|
|
| T.B.D. W |
| T.B.D. W | ||
consumption |
| ||||
|
|
|
| ||
Sleep mode | T.B.D. W |
| T.B.D. W | ||
|
|
| |||
|
|
|
|
|
|
|
| Standby mode | T.B.D. W |
| T.B.D. W |
|
|
|
|
|
|
Note 1: If the printer or scanner is not operated for more than three minutes, the printer goes into the power save mode within two minutes.
2:When no operation is made with the control panel for more than 13 minutes, the panel goes to the power save mode within two minutes.
1.4.2 Environmental Conditions
Table 1-11. Environmental Conditions
Condition | Temperature*1 | Humidity*1,2 | Shock | Vibration | |
Operating | 10 to 35°C | 20 to 80% | 1G | 0.15G, | |
(50 to 95°F) | (1 msec or less) | 10 to 55Hz | |||
|
| ||||
|
|
|
|
| |
Storage | 5 to 85% | 2G | 0.50G, | ||
(unpacked) | (2 msec or less) | 10 to 55Hz | |||
| |||||
|
|
|
|
|
Note *1: The combined Temperature and Humidity conditions must be within the
*2: No condensation
*3: Must be less than 1 month at 40°C.
| 90 |
|
|
|
|
| 80 |
|
|
|
|
| 70 |
|
|
|
|
| 60 |
|
|
|
|
Humidity (%) | 50 |
|
|
|
|
|
|
|
|
| |
| 40 |
|
|
|
|
| 30 |
|
|
|
|
| 20 |
|
|
|
|
|
|
| 27/80 |
|
|
| 10/50 | 20/68 | 30/86 | 35/95 | 40/104 |
Figure 1-4. Temperature/Humidity Range
CAUTION | When returning the repaired printer to the customer, make sure |
| the Printhead is covered with the cap and the ink cartridge is |
| installed. |
If the Printhead is not covered with the cap when the printer is off, turn on the printer with the ink cartridge installed, make sure the Printhead is covered with the cap, and then turn the printer off.
PRODUCT DESCRIPTION | General Specifications | 16 |