Replacing Consumables | 106 |
g Replace the lamp cover.
Insert the hook as shown in the illustration below, and attach the cover. Tighten the lamp cover fixing screw.
①
②
Attention
•Make sure you install the lamp securely. If the lamp cover is removed, the power turns off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the power does not turn on.
•This product includes a lamp component that contains mercury (Hg). Please consult your local regulations regarding disposal or recycling. Do not dispose of it with normal waste.
Resetting the lamp hours
The projector records how long the lamp is turned on and a message and indicator notify you when it is time to replace the lamp. After replacing the lamp, make sure you reset the Lamp Hours from the Configuration menu.
s "Reset Menu" p.84
aOnly reset the Lamp Hours after the lamp has been replaced. Otherwise the lamp replacement period is not indicated correctly.
Replacing the Air Filter
Air filter replacement period
It is time to replace the air filter when:
•There is a tear in the air filter.
•The message is displayed even though the air filter has been cleaned.
How to replace the air filter
The air filter can be replaced even when the projector is suspended from a ceiling.
a After you turn off the projector's power and the confirmation buzzer beeps twice, disconnect the power cable.
b Remove the air filter.
Grip the tab in the center of the air filter, and pull it straight out.
