Using Remote Control Using Control panel
q
You can save at a size of 400x300 dots.
E
When the message "Select this image?" is displayed, select
Yes.
F
Select the zoom factor from the zoom setting screen.
G
When the message "Save this image as the User's Logo?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message
"Completed." is displayed.
q
•Once a User's Logo has been saved, the logo cannot be returned to
the factory default.
•Saving the user's logo may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.

Saving a User's Logo

69