When WEP is selected

You can set the following items.

Sub Menu Function
WEP encryption You can set the encryption for WEP encryption.
128bit: Uses 128 (104) bit encoding
64bit: Uses 64 (40) bit encoding
Format You can set the input method for the WEP encryption key.
ASCII: Input text.
HEX: Input in HEX (hexadecimal).
Key ID Selects the WEP encryption ID key.
Encryption key 1
Encryption key 2
Encryption key 3
Encryption key 4
You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for
the network in which the projector participates. The type of character and the number that can be entered differ according to the WEP encryption
and Format settings.
If the number of characters you enter is shorter than the required character length, or if the number of characters you enter is longer than the
required character length, it does not connect.
128bit - ASCII: Single-byte alphanumerics, 13 characters.
64bit - ASCII: Single-byte alphanumerics, 5 characters.
128bit - HEX: 0 to 9 and A to F, 26 characters
64 bit - HEX: 0 to 9 and A to F, 10 characters
When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected

You can set the following items.

Sub Menu Function
PSK You can enter a PreSharedKey (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When the
PreSharedKey is entered and the [Enter] button is pressed, the value is set and displayed as an asterisk (*).
You cannot enter more than 32 characters on the Configuration Menu. When setting from Web Control, you can enter more than 32 characters.
s Projector Operation Guide "Changing Settings Using a Web Browser (Web Control)"
List of Functions
46