D
Move the box to select the part of the image to use as the
User's Logo.
Using the Remote Control Using the Control panel
q
You can save at up to 400 ^ 300 dots in size.
E
When Select this image? is displayed, select Yes.
F
Select the zoom factor from the zoom setting screen.
G
When the message Save this image as the User's Logo? is
displayed, select Yes.
The image is saved. After the image has been saved, the message
Completed. is displayed.
q
•Once a User's Logo has been saved, the logo cannot be returned
to the factory default.
•Saving the user's logo may take approximately 15 seconds. Do
not use the projector or any connected equipment while it is
saving, otherwise malfunctions may occur.
Saving a User's Logo
77