Front/Top
Name Function
AAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust
vent and do not put your face or hands near the
vent while projection is in progress.
BRemote Receiver Receives signals from the remote control. s Quick
Start Guide
Name Function
CA/V mute slide knob Slide the knob to open and close the A/V mute slide knob.
DFoot adjust lever Pull out the Foot adjust lever to extend and retract the
Front adjustable foot. s Quick Start Guide
EFront adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
s Quick Start Guide
FA/V mute slide knob Slide shut when not using the projector to protect the
lens. By closing during projection you can hide the
image and the sound (A/V Mute). s Quick Start
Guide , s p.19
GAir intake vent
(Air filter)
Takes in air to cool the projector internally. If dust
collects here it can cause the internal temperature to
rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air filter regularly. s p.67, p.72
HAir filter cover open/
close switch
Opens and closes the air filter cover. s p.72
Open this cover when installing the optional Wireless
LAN unit.
ISecurity cable
installation point
Pass a commercially available wire lock through here
and lock it in place. s p.32
JSecurity slot The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s p.32
KFocus ring Adjusts the image focus. s Quick Start Guide
LZoom ring Adjusts the image size. s Quick Start Guide
MControl panel s p.12
NLamp cover Open this cover when replacing the projector's Lamp.
s p.69
Part Names and Functions9