2.While pressing the release levers, raise or lower the projector until the screen image is correctly positioned.

3.Release the levers to lock the feet in their new position.

4.To fine-tune the height of the projector, turn the feet clockwise to raise the height or counterclockwise to lower it.

Controlling the Projector

You normally control the projector with the remote control. Buttons on the remote control allow you to do the following:

Turn power on or off

Adjust the volume

Mute the audio and video

Switch between computer and video images

Use the remote control as a wireless mouse when the projector is connected to the computer with the mouse cable

Access the projector menus to adjust the image, audio, video, or display settings (described in Chapter 3)

Access additional functions available with the optional ELP

Communication Kit software.

Functions of the remote control buttons are summarized on page 25. To use the remote control, always point it toward the remote control receiver in the front of the projector. You can use the remote control up to about 33 feet (10 meters) from the front of the projector. (This distance may be shorter if your batteries are low.)

Controlling the Projector

23