The lamp and temperature warning lights are flashing at the same time.An abnormality may have occurred in the projector. Turn off the projector and unplug the power cord from the wall outlet. Then plug the power cord back in and turn on the projector. If nothing changes, call the service center.
Warning: Except as specifically explained in this Owner's Manual, do not attempt to service this product yourself
Problems with the Image or Sound
An image does not appear on the screen.Check that the power light is on and the lens cover is off. Also make sure the cables are installed correctly, as described in Chapter 1.
The correct image source may not be selected. Press the Source button on the remote control or the control panel to choose the other image source.
Only part of the computer image is displayed.If the computer’s output resolution setting is set higher than 640 x 480, the projector resizes the image. If the computer output is not compatible with this resizing, choose a different display setting on the computer. In Windows 3.1, use Windows Setup in the Main program group. For a Macintosh, choose Control Panels under the Apple menu
52 | 5 • Troubleshooting |