4.The filter is attached to the other side of the filter cover. It is recommended that you use a small vacuum cleaner designed for computers and other office equipment to clean the filter. If you don’t have one, use a dry, lint-free cloth.

If the dirt is difficult to remove or if the filter is torn, replace it. Contact your ELP dealer or call EPSON Accessories

(800-873-7766 in the United States) to obtain a new one. Be sure to request part number 1023658.

5.Replace the filter.

6.Reconnect the power cord to the wall outlet.

Replacing the Lamp

The projector lamp typically lasts for about 4000 hours of use. It is time to replace the lamp when:

•

•

You notice that projected images get darker or start to deteriorate.

The lamp warning light is red.

Contact your local EPSON dealer or call EPSON Accessories

(800-873-7766 in the United States) for a replacement lamp. Use only replacement lamp part number ELPLP02.

Warning: Let the lamp cool before replacing it. During use, it becomes hot enough to burn you.

1.Turn off the projector and disconnect the power cord from the wall outlet.

2.Turn the projector over so you can access the lamp cover.

44

4 • Maintenance