5
Part Names and Functions
Front/Top
Name Function
AControl panel sp.8
BLamp cover Open this cover when replacing the projector's
lamp. sp.53
CAir exhaust vent Caution
Do not place objects that may become warped
or otherwise affected by heat near the air
exhaust vent and do not put your face or
hands near the air exhaust vent while
projection is in progress.
DFront adjustable
feet
Extend and adjust the position of the projected
image when the projector is placed on a
surface such as a desk. sQuick Start Guide
F
A
K
BJ
E
D
I
C
G
H
EFoot adjust lever Pull out the foot lever to extend and retract the
front foot. sQuick Start Guide
FLens cover glass
GRemote receiver Receives signals from the remote control.
sQuick Start Guide
HFocus ring Adjusts the image focus. While making the
adjustment you may hear an unusual noise.
This is normal. sQuick Start Guide
IZoom ring
(EMP-280 only)
Adjusts the image size. While making the
adjustment you may hear an unusual noise.
This is normal. sQuick Start Guide
JZoom/Focus ring
cover
To adjust the focus ring or zoom ring, slide the
knob to open and close the cover.
KAir filter (Air
intake vent)
This prevents dust and other foreign particles
from getting inside the projector when air is
drawn in. The projector displays a warning
message when it is time to clean or replace the
air filter.sp.48, 56
Name Function