List of Functions 28

Extended Menu
Sub Menu Function
Display You can make settings related to the projector's display.
Messages: You can set whether to display (On) or not display (Off) the source name when you change the input source, the color mode name
when you change the Color Mode, a message when no image signal is input, and so on.
Display Background*1: You can set the screen status for when no image signal is available to "Black", "Blue", or "Logo".
Startup Screen*1: You can set whether the startup screen (the image projected when starting the projector) is displayed (On) or not (Off).
A/V Mute*1: You can set the screen displayed during A/V Mute as "Black", "Blue", or "Logo".
User's Logo You can change the user's logo that is displayed as a background and displayed during A/V Mute. sp.58
Projection You can choose one of the following settings according to the way the projector is setup. sp.47
Front" "Front/Ceiling" "Rear" "Rear/Ceiling"
You can change the setting as follows by pressing down the [A/V Mute] button on the remote control for about five seconds.
Front" W "Front/Ceiling"
Rear" W "Rear/Ceiling"
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings concerning user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". sp.18

For EMP-280 For EMP-260