List of Functions 27

Settings Menu
Sub Menu Function
Keystone You can correct vertical keystone distortion in images.sQuick Start Guide
Zoom
(EMP-260 only)
Adjusts the image size.sQuick Start Guide
Wide: Larger Tele: Smaller
Operation Lock You can use this to restrict operation of the projector's control panel. sp.20
Brightness Control You can set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is
selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is
reduced. Electrical consumption: about a 40 W decrease, lamp life: about 1.3 times longer
Volu me You can adjust the volume.
Remote Receiver You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to
deactivate the remote receiver that you do not want to use or that is experiencing interference.
Tes t Pa tt ern When the projector is setup, a test pattern is displayed so that you can adjust the projection without connecting other equipment. While the test
pattern is displayed you can perform zoom adjustments, focus adjustments, and keystone correction.
To cancel the test pattern, press the [Esc] button on the remote control or the control panel.
Reset You can reset all adjustment values in the "Settings" menu to their default settings.
To return all menu items to their default settings, see sp.31

For EMP-260For EMP-280