13
3. Connect the big connector (D-Sub15) of the MAC desktop
adapter to the video output port converted in step 2.
4. Tighten the fixed scr ews for the MAC desktop adapter and the
converter.
5. Connect either end of the computer cable to the small connector
(D-Sub 15 Mini) of the MAC desktop adapter which you
connected in the previous steps.
6. Connect the other end of the computer cable to the pr ojector’s
Computer In1 port. The Computer In2 port is used when
connecting a second computer.
7. If you wish to view or check images on the computer’s monitor,
attach the big connector (D-Sub 15) of the Macintosh desktop
adapter which you connected in the previous steps to the MAC
monitor cable and connect it to the projector’s Monitor port. *1
8. Connect the small end of the main cable to the pr ojector’s
Mouse/Com 1 port. The Mouse/Com 2 port is used when
connecting a second computer.
9. Connect the MAC mouse cable (9-pin) to the MOUSE ter minal
on the large end of the main cable.
10. Disconnect the mouse from the computer port, and connect the
MAC mouse cable (4-pin) to this port.
11. If you are planning to use the ELP Link II software, connect
either end of a MAC serial cable to the MAC SERIAL terminal
on the large end of the main cable.
12. Connect the other end of the MAC serial cable to the Printer
port or Modem port on the back of your PowerBook.
*1. You may need your own adapter or one which came with your computer.
This depends on the model of the computer or monitor you connect.
Connecting to a Computer