75
Contact your local EPSON dealer for a replacement lamp. Use only
replacement lamp part number.
◆
Note:
Be sure to always use a new projector lamp. Otherwise the
projector lamp operating time display will indicate incorrect
information.
◆
Warning:
Allow the lamp to cool down before replacing it. During
use, it becomes hot enough to burn you.
1. Switch of f the projector and disconnect the power cable from the
wall socket.
2. Use a screwdriver, coin or similar object to loosen the two
retaining screws on the lamp cover. You cannot remove these
screws.
3. When the screws are loose, lift of f the lamp cover.
Replacing the Lamp
lamp cover