■
■ ■ ■ ■
10
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the
ELP Link IV software, you need to connect the main cable. It
provides connectors for:
• The PS/2 mouse cable or USB mouse cable (to use the
remote control as a mouse)
• The serial cable (to use the ELP Link IV software and the
Effects buttons on the remote control)
Refer to this illustration while following the steps below.
1. Connect the small end of the main cable to the projector’s
Mouse/Com 1 port. (Use the Mouse/Com 2 port if you
are connecting a second computer.)
Mouse/Com 1 port
main cable
9-pin serial cable
PS/2 mouse cable
(or USB mouse cable)