■
■ ■ ■ ■
12
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio 1 jack on the projector. (Use the Audio
2 jack if you are connecting a second computer.)
2. Connect the other end of the audio cable to the speaker or
audio out port on the computer’s sound card.
Connecting to a PC Laptop Computer
To connect the projector to your PC laptop computer, you
need to:
• Connect the computer cable
• Connect the mouse and/or serial cable (if you want to use
the remote control as a mouse or use the ELP Link IV
software)
• Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to
connect. Before beginning, turn off the projector and
computer if they are on.
♦
Note:
Laptop configurations vary. See your computer manual
for the location of the ports needed to connect your projector.
Audio 1 jack
audio cable