Epson EMP-830/EMP-835 If a Projector Cannot be Monitored or Controlled Using EMP Monitor

EMP Monitor Operation Guide

If a Projector Cannot be Monitored or Controlled Using EMP Monitor 9

Cause	Remedy
Is the projector connected to	Connect the network cable correctly.
the network correctly?	s"Network Cable Connections" in the
	User's Guide
Has the projector been set	Check the projector's network settings.
up correctly for connection	If using EMP-835 s"Connecting in
to the network?	Access Point Mode or Wired LAN Mode"
	in the EasyMP Network Setup Guide
	If using EMP-830 s"Projector Network
	Connecting Settings (EMP-830)" in the
	User's Guide
Has EMP Monitor been	Uninstall EMP Monitor and then re-install
installed to the computer	it.
correctly?
Have all projectors that are	Register the projector in the projector list.
to be monitored and	sp.3
controlled been registered in
the projector list?
Is the projector's "Standby	In order to use EMP Monitor to monitor
Mode" configuration menu	and control the projector when it is in
set to "Network ON"?	standby mode, the projector's
	"Extended" - "Standby Mode"
	configuration menu must be set to
	"Network ON".
	s"List of Configuration Menu
	Commands" in the User's Guide