EMP Monitor Operation Guide

Registering Projectors for Monitoring

 

4

 

 

 

Registration Using Automatic Detection

PROCEDURE

TIP

•Projectors that have been registered using automatic detection will be re-detected on the basis of projector name each time EMP Monitor is started.

1 Click the "Auto detect" button in the "Register projector" window.

2 Select the projector(s) to be registered, and then click the "Add" button.

If a projector does not appear in the list, use "Registration Using IP Address (Manual Registration)". sp.5

•If a password entry window is displayed, enter the password for the projector's administrator and then click the "OK" button.

If more than one projector was selected, the password entry windows for each projector will be displayed in succession.

3 Click the "Close" button to return to the main EMP Monitor window.

Refer to "Main EMP Monitor Window" for details on using the main window. sp.6