Epson EMP-830/EMP-835 Understanding the Projector List

						EMP Monitor Operation Guide
Main EMP Monitor Window								7
Understanding the Projector List
				Error information: If an error occurs with a projector, the following
					icons are used to show the status.
The projector list uses the following icons to show the projector statuses.
							Replace with a new lamp.
							s"Replacing the Lamp"
	Status: Shows the projector status.
					End of lamp life warning		in the "Replacing
		Power on and normal status
							Consumables" section of
		Power off and normal status					the User's Guide.
					Lamp problem		Refer to "Reading the
		Power on and abnormal status			High internal temperature		Indicators" to remedy the
							problem.
		Power off and abnormal status			(overheating)
							s"Problem Solving" in
		Network error (such as not connected to network or			Temperature warning		the User's Guide
		power cable not connected)			Internal problem
	Name: Shows the projector name.
	Input source: Shows the selected input source.				Fan problem
		Computer, Computer1 or InputA			Temperature sensor
					problem
		Computer2 or InputB
			The projector information that is generated when a problem is detected is
			stored until EMP Monitor is closed. The EMP Monitor displays will not be
		S-Video	updated automatically even if the projector status returns to normal. Click
			the "Refresh" button in the main window to update the status.
		Video
		D4 (Digital)
		DVI or HDMI (Digital)