Projector Care-21
Appendices
Appendix.fm7/22/03
Replacing consumables
fReplacing the air filter
(Air filter: ELPAF04)
Replacing the air filter can also be performed when the projector is mounted to a ceiling.
1Turn off the projector power, wait for
the cool-down period to end, then
disconnect the power cable.
Cool-downg takes about 20 seconds.
2Put your finger into the latch and lift
off the cover. Lift up the air filter to
remove it.
3Replace the air filter with a new one.
Take out the old air filter and install the new
one. Please ensure there are no gaps
between the air filter and the plastic grill.
4Replace the air filter cover.
First insert the tabs, and then press down on
the opposite side until it clicks into place.
fChanging the battery
(Replacement battery: 1 × CR2025 lithium battery)
1Remove the battery holder.
While pressing the catch of the battery holder
inwards, pull the battery holder out.
2Remove the old battery and insert the
new one.
Check the position of the (+) mark inside the
battery holder to ensure that the battery is
inserted the correct way.
3Replace the battery holder.
Press the battery holder in until it clicks.
pDispose of used air filters properly in accordance with
your local regulations.
cKeep batteries away from children to avoid the risk of accidents.
If a child swallows the battery, contact your doctor immediately.
pPlease dispose of used batteries in accordance with
local waste disposal regulations.
USERS_E.BOOK Page 21 Tuesday, July 22, 2003 3:37 PM