Epson EMP-TW10 manual p p

Connecting a Computer-11
Connecting Equipment
Before.fm7/22/03
Outputting images and audio from a computer
Adjusting computer generated images
fAuto setup (Computer connections)
The computer signal is analysed and the following settings are adjusted to ensure the optimum image quality.
• Trackingg
• Position
•Sync.
g
Adjust the Tracking and Sync settings manually if Auto setup cannot be performed. ([Menu] button → "Image" → "Picture
Quality" → "Tracking", "Sync.") s"Image menu" P.13
Computer cable (optional)
To monitor port To Input B
port
stereo mini jack
To audio out port
stereo mini jack - 2RCA cable
(commercially available)
To Audio port
RCA jack
pWhen using computer and video equipment alternately, swap the cable or use an audio switch.
p• You can set Auto setup to off in the "Image"
→ "Auto Setup" configuration menu. (The default is ON) s"Image menu"
P.13
• When Auto setup is set to off, press the [Auto] button on the remote control to perform auto setup.
• If you press the [Auto] button during Freeze operation, or when a configuration menu is being displayed, the display will
be halted and auto setup will take place.
USERS_E.BOOK Page 11 Tuesday, July 22, 2003 3:37 PM